Seals 密封 Seals are used to prevent fluid from passing a certain point, as well as to keep air and dirt out of the system in which they are used. The increased use of hydraulics a...

一、名称 SOLENOID THERMOSTAT 电磁恒温器 二、件号 341F010000,341F020000 三、章节号 36-11-10 四、适用机型 A319/A320 五、系统 36-PNEUMATIC 气源 六、安装位置 发动机吊架     七、部件...

1.2 Conversions换算

G. Visual Inspection 目视检查 (1) General Information 通用信息 (a) Visual inspection involves viewing the part for general appearance in an effort to locate conditions, which cause...

      开关是一种控制电路中电流通断的装置，广泛用于家庭、工业和电子设备中。 1. 极和掷的命名约定 开关的基本功能用“极”和“掷”来描述： •极 (Pole)：表示开关的输入触点数量，或一个...

   

H. Electrical Component Inspection 电气组件检查CAUTION: REFER TO APPLICABLE MANUAL PRIOR TO PERFORMING ANY ELECTRICAL CHECKS TO ENSURE THAT CHECKS WILL NOT DAMAGE EQUIPMENT.注意：...

ATA 36 气源系统PNEUMATIC【737NG】 网络下载，应该是机务在线，不记得出处了，仅供学习

 

 

 

 

一、基本信息1)件号：4404B000-0042)名称：Overtemperature shutoff valve (OTSOV)3)机型：737NG，B7774)章节号：47-11-01二、故障信息维护码：4730025  

 4)琥珀色灯亮也会指示为该活门故障 

 图二

一、名称PNEUMATIC TEMPERATURE SENSOR气动温度传感器二、件号766A0000-01,766B0000-01,766C0000-01三、章节号21-52-28四、适用机型A318/A319/A320/A321/A330/A340五、系统21 AIR CONDITIONING...

I.Curvic Coupling Inspection 弧形联轴器检查NOTE: Nomenclature for curvic coupling is provided in Figure 320.注：图 320 中提供了弧形联轴器的命名。(1) Inspect components with curvic ...

1.3 Aircraft Nomenclature飞机术语Axes of an Airplane An airplane in flight is free to rotate about three axes: horizontal, longitudinal and vertical. Each axis is perpendicular to...

K.Bubble Point Check for Filters过滤器气泡点检查(1) Perform bubble point test on filter in accordance with MIL-F-5504B.根据MIL-F-5504B对过滤器进行气泡点测试。(a) The largest pore s...

L.Pressure Drop Check: Cleaned Metallic Filter Elements压降检查：清洁的金属滤芯Check pressure drop of cleaned filter element as follows:检查清洁后的滤芯压降，方法如下：NOTE: Check ...

组装ASSEMBLY   1. Planning Data 计划数据 A. Reason for the Job 工作原因 (1) Use these procedures to assemble the modulating shutoff valve. Do only those procedures that are applic...